
# Configuration for aprsc, an APRS-IS server for core servers

# Your unique server ID
ServerId   MAKSIAT.DED1.DE
# Passcode for the server ID
PassCode   0
# Who is running this server?
MyAdmin    "ded1 EMPIRE, 9M2PJU"
# The email address where the admin can be reached
MyEmail    root@ded1.net

### Directories #########
# Data directory (for persistent state files - currently none)
RunDir data

# If logging to a file (-o file), enable built-in log rotation.
# LogRotate <megabytes> <filecount>
# "LogRotate 10 5" keeps 5 old files of 10 megabytes each.
LogRotate 20 5

### Intervals and timers #########
# Interval specification format examples:
# 600 (600 seconds), or 600s, 5m, 2h, 1h30m, 1d3h15m24s, etc...

# When no data is received from an upstream server in N seconds, switch to
# another server.
UpstreamTimeout		15s

# When no data is received from a downstream server in N seconds, disconnect
ClientTimeout		48h

### TCP listener ##########
# Listen <socketname> <porttype> tcp <address to bind> <port> <options...>
#	socketname: any name you wish to show up in logs and statistics
#	porttype: one of:
#		fullfeed - everything, after dupe filtering
#		igate - igate / client port with user-specified filters
#		udpsubmit - UDP packet submission port (8080)
#		dupefeed - duplicate packets dropped by the server
#	options:
#		filter "m/500" - force a filter for users connected here
#		maxclients 100 - limit clients connected on this port
#		acl etc/client.acl - match client addresses against ACL
#		hidden - don't show the port in the status page
#
#              If you wish to provide UDP service for clients, set up a
#              second listener on the same address, port and protocol.
#
#              The  "::"  is IPv6 "IN6ADDR_ANY", whereas "0.0.0.0" is same
#              with IPv4.
#
#              On FreeBSD you need to have separate listeners for IPv4 and
#              IPv6. On Linux, just use :: alone - the IPv6 listener will
#              catch the IPv4 connections just as well.
#
# Example of normal server ports for Linux, supporting both TCP and UDP,
# IPv4 and IPv6:
# 
Listen "Full feed"                                fullfeed tcp ::  10152 hidden
Listen "185.232.69.198"                           fullfeed udp ::  10152 hidden
Listen "2a03:4000:4e:a73::4"			  fullfeed udp ::  10152 hidden


Listen "Client-Defined Filters"                   igate tcp ::  14580
Listen ""                                         igate udp ::  14580

Listen "350 km from my position"                 igate tcp ::  20350 filter "m/350"
Listen ""                                        igate udp ::  20350 filter "m/350"

Listen "UDP submit"                               udpsubmit udp :: 8080

### Uplink configuration ########
# Uplink <name> <type> tcp <address> <port>
#	name: a name of the server or service you're connecting to
#	type: one of:
#		full - full feed
#		ro   - read-only, do not transmit anything upstream
#
# If you wish to specify multiple alternative servers, use multiple
# Uplink lines, one for each server.
#
# Normally a single line for the 'rotate' address is fine - it will connect
# to one of the servers in a random fashion and go for another one should
# the first one become unavailable.
#
#Uplink "Core rotate" full  tcp  rotate.aprs.net 10152
#Uplink "Core rotate" ro    tcp  rotate.aprs.net 10152

# OPTIONAL: Bind source address before connecting to an uplink
# You can enter two addresses, one for IPv4 and one for IPv6 connections.
# Needed if you have multiple IP addresses on your server and only one
# of them is allowed to connect by the remote server.
UplinkBind 185.232.69.198
UplinkBind 2a03:4000:4e:a73::4

### HTTP server ##########
# HTTPStatus port provides a status view to web browsers.
# IPv6+IPv4 support works slightly differently than in Listen:
# :: is "all addresses" for IPv6, 0.0.0.0 for IPv4, but
# :: only works if you actually have a global IPv6 address
# configured on the system.
# The example is for IPv4, change the address to :: if you have
# IPv6. For FreeBSD, or if you wish to support multiple specific
# ports/addresses, use multiple HTTPStatus directives for each.
HTTPStatus 185.232.69.198 14501
# HTTPUpload port allows position uploads over HTTP
HTTPUpload 0.0.0.0 8080

### Environment ############
# When running this server as super-user, the server can (in many systems)
# increase several resource limits, and do other things that less privileged
# server can not do.
#
# The FileLimit is resource limit on how many simultaneous connections and
# some other internal resources the system can use at the same time.
# If the server is not being run as super-user, this setting has no effect
# in case it is above what normal user can set.
#
FileLimit        10000

### Operator attention span qualification run ###########
# After configuring the rest of the settings, remove this bad command
# from the configuration file. It's here only to avoid starting the
# server up accidentally with an invalid configuration.
MagicBadness	42.7

